% Skapad med Modbus Creator
% - OBS! Användaren ansvarar själv för att samma TYPID inte används flera gånger i samma apparat.
%   TYPID 10000-19999 är för användardefinierade enheter
DEVICETYPE Danfoss_Robust NAMED "WM_HPC_Holding" TYPEID 10773 IS

 PARAMETER
  Id       : "Adress";
  V11 : "Extraheater" ["%"];
  V12 : "Block extra heater" [""];

 PUBLIC
  V1 : "Supplytemperatur" ["°C"];
  V2 : "Returntemperatur" ["°C"];
  V3 : "Outdoor temp" ["°C"];
  V4 : "Hotwater start temperatur" ["°C"];
  V5 : "Hotgas temp" ["°C"];
  V6 : "Brine in Tempersatur" ["°C"];
  V7 : "Brine out temperatur" ["°C"];
  V8 : "Primary supply temp" ["°C"];
  V9 : "Room temperatur" ["°C"];
  V10 : "Sum Larm" [""];

 PRIVATE
  count6;

 BAUDRATE 19200;
 CHECKSUM MODBUS SWAPPED;

 TELEGRAM Read3 NAMED "Read 3" IS
  QUESTION
   DATA[0] := BYTE(Id); % Enhetens Modbus adress
   DATA[1] :=  HEX(03); % Modbus kommando för att läsa register kod 03
   DATA[2] := RWORD(2000); % Start address
   DATA[4] := RWORD(75); % Antal register att läsa
  ANSWER SIZE 155 % (Antal register * 2) + 5
   DATA[0] = BYTE(Id);
   DATA[1] = BYTE(03);
   DATA[2] = BYTE(150); % Antal Bytes
   DATA[3] -> RWORD(V1 := DATA;);
   DATA[7] -> RWORD(V2 := DATA;);
   DATA[11] -> RWORD(V3 := DATA;);
   DATA[15] -> RWORD(V4 := DATA;);
   DATA[19] -> RWORD(V5 := DATA;);
   DATA[23] -> RWORD(V6 := DATA;);
   DATA[27] -> RWORD(V7 := DATA;);
   DATA[31] -> RWORD(V8 := DATA;);
   DATA[35] -> RWORD(V9 := DATA;);
   DATA[151] -> RWORD(V10 := DATA;);
  TIMEOUT 300
 END;

 TELEGRAM WriteRegister NAMED "Write Register" IS
  QUESTION
   DATA[0] := BYTE(Id); % Enhetens Modbus adress
   DATA[1] :=  HEX(06); % Modbus kommando för att skriva ett register
   DATA[2] <- RWORD(
    IF(count6>1) THEN count6 := 0; ENDIF;
    IF (count6=0) THEN DATA := 2048;
    ELSIF (count6=1) THEN DATA := 2072;
    ENDIF;
   ); % Register adress
   DATA[4] <- RWORD(
    IF (count6=0) THEN DATA := V11;
    ELSIF (count6=1) THEN DATA := V12;
    ENDIF;
   );
  ANSWER SIZE 8
   DATA[0] = BYTE(Id);
   DATA[1] = BYTE(06);
  TIMEOUT 300
 END;
END;