% Skapad med Modbus Creator
% - OBS! Användaren ansvarar själv för att samma TYPID inte används flera gånger i samma apparat.
%   TYPID 10000-19999 är för användardefinierade enheter
DEVICETYPE SwegonCASA NAMED "SwegonCASA" TYPEID 15033 IS

 PARAMETER
  Id       : "Adress";
  V17 : "wOpMode" [""]; % 0=Away, 1=Normal, 2=Boost
  V18 : "wSupplyTempSP" ["°C"]DEC1;
  V19 : "wClearAlarms" [""]; % 1 = FreezingDanger 2 = ServiceReminderUser 3 = ServiceReminderService 4 = IRSensorFailure 5 =TemperatureDeviation 6 = Efficiency 7 = FanFailureSupply 8 = FanFailureExhaust 9 = OverheatProtection 10 = FilterGuard 11 = TempSensorError

 PUBLIC
  V1 : "OpMode" [""]; % 0=Away, 1=Normal, 2=Boost
  V2 : "UnitState" [""]; % 0=Stopped, 1=Running
  V3 : "SupplyTempSP" ["°C"]DEC1;
  V4 : "TempT3" ["°C"]DEC1;
  V5 : "TempT4" ["°C"]DEC1;
  V6 : "HREefficiency" ["%"];
  V7 : "IR failure" [""]; % 0=Off, 1=Alarm
  V8 : "TempDeviation" [""]; % 0=Off, 1=Alarm
  V9 : "FreezeDanger" [""]; % 0=Off, 1=Alarm
  V10 : "FilterGuard" [""]; % 0=Off, 1=Alarm
  V11 : "OverheatAHeater" [""]; % 0=Off, 1=Alarm
  V12 : "Efficiency" [""]; % 0=Off, 1=Alarm
  V13 : "FanFailureSA" [""]; % 0=Off, 1=Alarm
  V14 : "FanFailEA" [""]; % 0=Off, 1=Alarm
  V15 : "Service" [""]; % 0=Off, 1=Alarm
  V16 : "TempSensor" [""]; % 0=Off, 1=Alarm

 PRIVATE
  count3;
  count4;
  count6;
  tmp;

 BAUDRATE 9600;
 CHECKSUM MODBUS SWAPPED;

 TELEGRAM Read3 NAMED "Read 3" IS
  QUESTION
   DATA[0] := BYTE(Id); % Enhetens Modbus adress
   DATA[1] :=  HEX(03); % Modbus kommando för att läsa register
   DATA[2] <- RWORD(
    IF(count3>2) THEN count3 := 0; ENDIF;
    IF (count3=0) THEN tmp := 4100;
    ELSIF (count3=1) THEN tmp := 8000;
    ELSIF (count3=2) THEN tmp := 8003;
    ENDIF;
    DATA:= tmp;
   );
   DATA[4] := RWORD(01);
  ANSWER SIZE 7
   DATA[0] = BYTE(Id);
   DATA[1] = BYTE(03);
   DATA[3] -> RWORD(
    IF (count3=0) THEN V1 := DATA;
    ELSIF (count3=1) THEN V2 := DATA;
    ELSIF (count3=2) THEN V3 := DATA/10;
    ENDIF;
    count3 := count3+1;
   );
  TIMEOUT 300
 END;

 TELEGRAM Read4 NAMED "Read 4" IS
  QUESTION
   DATA[0] := BYTE(Id); % Enhetens Modbus adress
   DATA[1] :=  HEX(04); % Modbus kommando för att läsa register
   DATA[2] <- RWORD(
    IF(count4>12) THEN count4 := 0; ENDIF;
    IF (count4=0) THEN tmp := 335;
    ELSIF (count4=1) THEN tmp := 336;
    ELSIF (count4=2) THEN tmp := 341;
    ELSIF (count4=3) THEN tmp := 366;
    ELSIF (count4=4) THEN tmp := 367;
    ELSIF (count4=5) THEN tmp := 368;
    ELSIF (count4=6) THEN tmp := 369;
    ELSIF (count4=7) THEN tmp := 370;
    ELSIF (count4=8) THEN tmp := 371;
    ELSIF (count4=9) THEN tmp := 372;
    ELSIF (count4=10) THEN tmp := 373;
    ELSIF (count4=11) THEN tmp := 374;
    ELSIF (count4=12) THEN tmp := 375;
    ENDIF;
    DATA:= tmp;
   );
   DATA[4] := RWORD(01);
  ANSWER SIZE 7
   DATA[0] = BYTE(Id);
   DATA[1] = BYTE(04);
   DATA[3] -> RWORD(
    IF (count4=0) THEN V4 := DATA/10;
    ELSIF (count4=1) THEN V5 := DATA/10;
    ELSIF (count4=2) THEN V6 := DATA;
    ELSIF (count4=3) THEN V7 := DATA;
    ELSIF (count4=4) THEN V8 := DATA;
    ELSIF (count4=5) THEN V9 := DATA;
    ELSIF (count4=6) THEN V10 := DATA;
    ELSIF (count4=7) THEN V11 := DATA;
    ELSIF (count4=8) THEN V12 := DATA;
    ELSIF (count4=9) THEN V13 := DATA;
    ELSIF (count4=10) THEN V14 := DATA;
    ELSIF (count4=11) THEN V15 := DATA;
    ELSIF (count4=12) THEN V16 := DATA;
    ENDIF;
    count4 := count4+1;
   );
  TIMEOUT 300
 END;

 TELEGRAM WriteRegister NAMED "Write Register" IS
  QUESTION
   DATA[0] := BYTE(Id); % Enhetens Modbus adress
   DATA[1] :=  HEX(06); % Modbus kommando för att skriva ett register
   DATA[2] <- RWORD(
    IF(count6>2) THEN count6 := 0; ENDIF;
    IF (count6=0) THEN DATA := 4100;
    ELSIF (count6=1) THEN DATA := 8003;
    ELSIF (count6=2) THEN DATA := 8028;
    ENDIF;
   ); % Register adress
   DATA[4] <- RWORD(
    IF (count6=0) THEN DATA := V17;
    ELSIF (count6=1) THEN DATA := V18*10;
    ELSIF (count6=2) THEN DATA := V19;
    ENDIF;
    count6 := count6+1;
   );
  ANSWER SIZE 8
   DATA[0] = BYTE(Id);
   DATA[1] = BYTE(06);
  TIMEOUT 300
 END;
END;